[NDS App] Beup Live 0.3d

[dratersnis]

nice... it works now.. much faster thn old version... though the top screen is glitchy

i hav a little trick with that hanging problem...
if u already hav ur wifi set up on the ds but it hangs... repetedly tap "use Firmware" button and "stop"... after a few secs it goes to sign on screen... worked with me on this version and last.

[Big Lou]

Did everything you said but it won't connect.  It says "Connected to access point but unable to connect to the server."

[HtheB]

Did everything you said but it won't connect.  It says "Connected to access point but unable to connect to the server."

is your wifi connected to the internet?? that is the only problem 


or.. you just really did something wrong..

[Big Lou]

Yeah, it's connected to the internet.  Just got out of a match in Blubb3D.

And there's not much I could have done wrong...

[HtheB]

Yeah, it's connected to the internet.  Just got out of a match in Blubb3D.

And there's not much I could have done wrong...

Well.. if your DS says it couldn't connect to a server (it connects to the Nintendo Server!) that means you really did something wrong while entering the manual things......


 

[dratersnis]

Big Lou, did you try my method? it works nearly everytime for me... i hav to do it everytime i use beup otherwise i get the same problem as you

[HtheB]

Well? Just try to boot again..  and try again... it works sometimes..

but... tell me more about it..


does your DS totally crash?
Does the touchscreen work?

[Keoniomega]

HtheB,
Thank you for your great program.  I would like to mention, though quite unfortunate, I'm currently unable to get this version of Beup to work on the MMD.  I've patched it, loaded it on to the root of my card, set the settings to those that you have detailed, set the clock to 0:00, and all it will do is show the Neoflash screen and then show "connecting" and then hang with no touch screen response.
I really like this piece of software but it looks like I'll have to wait for another release and hope that it will work for the MMD.

Thank you
Keoniomega

[Lostboy_1]

I got the same problem has big lou, i got a r4ds and i load the file and it just freeze with "searching ....." on the top screen

a couple people on dcemu.co.uk forum are having the same problem. I don't know if there not patching but i am.

[Big Lou]

Sorry to say, but I have entered in everything perfectly.  The program freezes.

[HtheB]

Seems to be R4 has a problem?

I couldn't test it because I needed to get it before the deathline.. 

I'll try to fix that problem... (me = @ school now..  )

[Tassu]

Tested and it works great on scsd and neo2-sd.

Good luck!

[Badablek]

I'm using an R4DS and patched with DLDI.  Beup starts up, but hangs at "Connecting using firmware setup: Searching..." and I'm assuming freezes.  Non of the buttons work, and I can't stop it.

Seems to be R4 has a problem?

I couldn't test it because I needed to get it before the deathline.. 

I'll try to fix that problem... (me = @ school now..  )

This is like the old PALib bug that occured with M3Simply/R4DS, with the touchscreen (does not work at all)....I tried this great app with a CycloDS (clone of SuperCard), works great (connect to my Netgear DG834 really fast)....same DS, same router, same app, same connexion settings > Does not work on my M3Simply, hangs when trying to connect to the router (of course I patched the binary with the good DLDI )

BTW it works really great on the others linkers 

[daninski]

the supercard lite hangs on the searching  thing too, it connects fine with the previouse version.

[Badablek]

Try the alternative DLDI file, from Moonlight

works for me with the CycloDS lite (MicroSD), clone of the SC Lite MicroSD