« previous next »
Pages: [1]   Go Down

Author Topic: Reset button gets in the way on Laseractive PAC  (Read 2192 times)

0 Members and 1 Guest are viewing this topic.

Offline Vlcice

  • Newbie
  • *
  • Posts: 3
Reset button gets in the way on Laseractive PAC
« on: June 08, 2009, 04:57:15 PM »
I have a bit of a strange problem with my 64M PCE flashcart, which I just received today.

The card slot on my Laseractive PC-Engine module goes down further than on some other hardware. As a result, it's constantly holding in the reset button - which means no game will work! Is there anything I can do about this?
« Last Edit: June 08, 2009, 05:02:21 PM by Vlcice »
Logged

Offline Dr.neo

  • Administrator
  • Hero Member
  • *****
  • Posts: 3467
Re: Reset button gets in the way on Laseractive PAC
« Reply #1 on: June 08, 2009, 11:08:09 PM »
i think u need remove this reset switch in your situation
Logged
In my world,have 0 and 1 only ......Matrix World......

Offline Vlcice

  • Newbie
  • *
  • Posts: 3
Re: Reset button gets in the way on Laseractive PAC
« Reply #2 on: June 13, 2009, 11:25:14 AM »
All right, I'll try to remove it. Any advice? I only have a little experience with desoldering.

I'd suggest changing the description on the Neoflash and IC2005 sites about its being compatible with every PC-Engine. It's evidently not compatible with mine out of the box.
« Last Edit: June 13, 2009, 11:26:47 AM by Vlcice »
Logged

Offline Vlcice

  • Newbie
  • *
  • Posts: 3
Re: Reset button gets in the way on Laseractive PAC
« Reply #3 on: June 24, 2009, 06:00:23 AM »
Just a quick update: it works fine with the reset button gone.
Logged
Pages: [1]   Go Up
« previous next »