Author Topic: the NEO MD flash cart lite version released,in stock now  (Read 20137 times)

0 Members and 1 Guest are viewing this topic.

Offline Dr.neo

  • Administrator
  • Hero Member
  • *****
  • Posts: 3826
the NEO MD flash cart lite version released,in stock now
« on: March 23, 2007, 02:19:32 AM »
the NEO MD flash cart lite version released,in stock now!

spec:
* build in 32M flash,support up to 32M single rom
* re-programable,100,000 times erase/write
* can upload/download and verify the rom from PC
* use printing port to burn
* not need extra power supply

some photo:



















driver V1.0 download : http://www.neoflash.com/driver/NEO_MD_Lite_V1.0.rar

« Last Edit: June 11, 2007, 12:34:19 AM by Dr.neo »
In my world,have 0 and 1 only ......Matrix World......

Offline wonderpus

  • Newbie
  • *
  • Posts: 3
Re: the NEO MD flash cart lite version released,in stock now
« Reply #1 on: March 23, 2007, 06:33:15 AM »
is the USB just for power ?
i have a Mac so i guess i can't use this ?


Offline murdiaries

  • Jr. Member
  • **
  • Posts: 77
Re: the NEO MD flash cart lite version released,in stock now
« Reply #2 on: March 23, 2007, 07:37:00 AM »
What about the NEO MD 3in1 that supports NEO2-SD?

Offline Dr.neo

  • Administrator
  • Hero Member
  • *****
  • Posts: 3826
Re: the NEO MD flash cart lite version released,in stock now
« Reply #3 on: March 23, 2007, 10:23:26 AM »
USB just for power.
and MD 3in1 not ready yet.
In my world,have 0 and 1 only ......Matrix World......

Offline cd_vision

  • Newbie
  • *
  • Posts: 26
Re: the NEO MD flash cart lite version released,in stock now
« Reply #4 on: March 24, 2007, 10:29:17 AM »
This is stupid. It's no better than the cart that Tototek sells. Why are you so late releasing something that's not an improvement?

Quit screwing around and get the real cart released.

Offline cd_vision

  • Newbie
  • *
  • Posts: 26
Re: the NEO MD flash cart lite version released,in stock now
« Reply #5 on: March 25, 2007, 04:07:08 AM »
Ok, I think that last post wasn't really specific enough.

One of the biggest problems with the Tototek cartridges is that they use a Parallel cable to transfer data to them. Many computers have problems with it, especially newer computers.

You must make this cartridge in a USB only format. If it had only this difference, I might have bought it.

I am much more excited about the 3-in-1 cartridge though, please complete that instead. I don't think anyone will buy this version.

Offline murdiaries

  • Jr. Member
  • **
  • Posts: 77
Re: the NEO MD flash cart lite version released,in stock now
« Reply #6 on: March 25, 2007, 09:38:05 AM »
I agree with cd_vision.

Everyone is waiting the famous 3 in 1 product, as the project in the title says.


So why wasting time in copying Tototek cart?

Please Dr.Neo, finish the project we all want! :)

Offline Charles MacDonald

  • Newbie
  • *
  • Posts: 4
Re: the NEO MD flash cart lite version released,in stock now
« Reply #7 on: March 25, 2007, 12:19:19 PM »
This looks great! And it has cool artwork on the cartridge label. :)

Dr. Neo, does it also work with the the 32X? I'm guessing it does, but would like to check.

Thanks for continuing to support the Mega Drive.

Offline wonderpus

  • Newbie
  • *
  • Posts: 3
Re: the NEO MD flash cart lite version released,in stock now
« Reply #8 on: March 25, 2007, 12:41:49 PM »
can you give any info on speed ?
i'd be interested in using this for Development purposes mostly
so fast turn around would be nice ..

Offline wonderpus

  • Newbie
  • *
  • Posts: 3
Re: the NEO MD flash cart lite version released,in stock now
« Reply #9 on: March 28, 2007, 03:09:27 AM »
i've recently been thinking about getting a new PC , since i am currently using a Mac Mini G4 ..
my problem is i can't find a NEW pc with a parallel port on it ?#
are there adapters that convert a USB port to parallel ?


Offline cd_vision

  • Newbie
  • *
  • Posts: 26
Re: the NEO MD flash cart lite version released,in stock now
« Reply #10 on: March 28, 2007, 09:41:55 AM »
They're out there but for this purpose will most likely not work. There are many reports from Tototek customers that could not get their programmers to respond when using them.  These kind of connections work best on older PCs. I'm really shocked that Neoflash decided to stick with Parallel.

i've recently been thinking about getting a new PC , since i am currently using a Mac Mini G4 ..
my problem is i can't find a NEW pc with a parallel port on it ?#
are there adapters that convert a USB port to parallel ?




Offline Dr.neo

  • Administrator
  • Hero Member
  • *****
  • Posts: 3826
Re: the NEO MD flash cart lite version released,in stock now
« Reply #11 on: March 28, 2007, 11:25:51 AM »
hi all,the NEO MD lite version just for simple application, the printing port can offer 500K transfer speed,but need to wait the flash,so the burn time is not so fast.

when the neo 3in1 MD cart ready,it just come with one SL5 USB loader,without any printing port support.
In my world,have 0 and 1 only ......Matrix World......

Offline KanedaFr

  • Newbie
  • *
  • Posts: 4
    • SpritesMind
Re: the NEO MD flash cart lite version released,in stock now
« Reply #12 on: March 28, 2007, 05:05:55 PM »
honestly, I don't think you'll make a lot of money with this one...
we're all waiting for 3in1...(my MD is sleeping waiting it!) ::sm-24.gif::

oh, I suggest you include the transfert protocol to UCON if you want more support...

anyway, I'll always support this kind of stuff so congratulation!!! :)

EDIT: it doesn't seems ic2005 got it yet :(
EDIT2: how did you make the cartdrige ? we're looking for an easy way to produce some....
« Last Edit: March 28, 2007, 05:26:04 PM by KanedaFr »

Offline bigmonster

  • Newbie
  • *
  • Posts: 2
Re: the NEO MD flash cart lite version released,in stock now
« Reply #13 on: April 01, 2007, 04:42:38 PM »
Parallel sucks....and why 32M,I remember the largest MD game is 40M.

Offline cd_vision

  • Newbie
  • *
  • Posts: 26
Re: the NEO MD flash cart lite version released,in stock now
« Reply #14 on: April 03, 2007, 09:43:47 AM »
Does this product support SRAM saving? ::sm-17.gif::