Author Topic: ##RELEASE## [ Input Test DS (PD) (U) (080210), Binary + Source ]  (Read 6891 times)

0 Members and 1 Guest are viewing this topic.

Offline cphx

  • Newbie
  • *
  • Posts: 9
  • NEO newbie
Input Test DS (PD) (U)
================================================================================
Hardware diagnostic utility for the Nintendo DS to display debug information about pressed Buttons / D-Pad and touches on the Touchscreen. This is might be useful if someone wants to verify the sensitivity & integrity of the controls and touchscreen when buying a used console.

It's my first project on the DS, so please be patient. Anyway, i like it.

https://sourceforge.net/downloads/inputtestds/

autograms later ;)

Offline Dr.neo

  • Administrator
  • Hero Member
  • *****
  • Posts: 3824
Re: ##RELEASE## [ Input Test DS (PD) (U) (080210), Binary + Source ]
« Reply #1 on: August 03, 2010, 04:29:58 PM »
cool,it's useful tool  ~sm-76.gif~.gif
In my world,have 0 and 1 only ......Matrix World......

Offline cphx

  • Newbie
  • *
  • Posts: 9
  • NEO newbie
...
« Reply #2 on: August 03, 2010, 09:12:21 PM »
Thanks :) It's just to get warmed up. I installed the DevKiPro lately and still playing around with it. Nothing serious yet, but this will change. Since i am familiar with Assembler and low level programming i thought about to write a firmware replacement for the ****py R4\R4i SDHC Upgrade Interface but i can't find any references to execute roms from within the firmware, so it will take some time to figure it out i think.

Offline cphx

  • Newbie
  • *
  • Posts: 9
  • NEO newbie
Any Ideas for something other ?
« Reply #3 on: August 06, 2010, 10:33:05 AM »
maybe someone has an idea what to program or port for the ds ?