Author Topic: the NEO 8in1 PSP PAD installing instruction (with photo)  (Read 82156 times)

0 Members and 1 Guest are viewing this topic.

Offline jza802k

  • Newbie
  • *
  • Posts: 5
Re: the NEO PSP PAD installing instruction (with photo)
« Reply #15 on: February 21, 2006, 01:06:30 PM »
For those of use that have already preordered one, will we be emailed when the pad is ready so that we can specify which color we would like to receive?   Thanks

Offline Dr.neo

  • Administrator
  • Hero Member
  • *****
  • Posts: 3827
Re: the NEO PSP PAD installing instruction (with photo)
« Reply #16 on: February 28, 2006, 10:57:17 PM »
next week start for ship  :)
In my world,have 0 and 1 only ......Matrix World......

Offline Lechuck

  • Jr. Member
  • **
  • Posts: 54
Re: the NEO PSP PAD installing instruction (with photo)
« Reply #17 on: March 29, 2006, 07:22:00 PM »
and the usb is for wath ?

and can u charge AA batteries with the pad ?
« Last Edit: March 30, 2006, 12:38:20 AM by Lechuck »

Offline suloku

  • Newbie
  • *
  • Posts: 29
Re: the NEO PSP PAD installing instruction (with photo)
« Reply #18 on: April 23, 2006, 10:25:23 PM »
and the usb is for wath ?

and can u charge AA batteries with the pad ?

Thhe USB are for charging the AA batteries, but you caan charge them with the DC  adaptor.

Dr.neo:

Why does  my psp  batterie consume while i'm playing with pad's batteries? (switch ON possition and the battery icon isn't in the screen, so it must be using external ppower,  but it isn't)

Offline bandit

  • Newbie
  • *
  • Posts: 25
    • DCEmu Reviews
Re: the NEO PSP PAD installing instruction (with photo)
« Reply #19 on: April 24, 2006, 12:58:50 PM »
I have a question..is it OK if the cable bends as in folds and creases? When I insert the memory stick card into the PSP and when I try to hide the ribbon inside, it goes inside the groove on the side of the pad but not all of it goes in, so I shove the remaining cable under the PSP thus causing it to leave a fold on the ribbon

Offline Dr.neo

  • Administrator
  • Hero Member
  • *****
  • Posts: 3827
Re: the NEO PSP PAD installing instruction (with photo)
« Reply #20 on: April 24, 2006, 01:18:50 PM »
and the usb is for wath ?

and can u charge AA batteries with the pad ?

Thhe USB are for charging the AA batteries, but you caan charge them with the DC  adaptor.

Dr.neo:

Why does  my psp  batterie consume while i'm playing with pad's batteries? (switch ON possition and the battery icon isn't in the screen, so it must be using external ppower,  but it isn't)

i thought your PAD battery was low power,so can't use it to supply psp work.

but if you can see your PSP power light turn to red when u plug in the PAD power cable to psp,then it mean your PAD battery start to charging the PSP,the PAD battery has enough power in this situation.
In my world,have 0 and 1 only ......Matrix World......

Offline suloku

  • Newbie
  • *
  • Posts: 29
Re: the NEO PSP PAD installing instruction (with photo)
« Reply #21 on: April 26, 2006, 03:50:19 AM »
I have a question..is it OK if the cable bends as in folds and creases? When I insert the memory stick card into the PSP and when I try to hide the ribbon inside, it goes inside the groove on the side of the pad but not all of it goes in, so I shove the remaining cable under the PSP thus causing it to leave a fold on the ribbon

Try a little more, it fills well between the psp and the pad, on the side.


Quote from:  Dr.neo
i thought your PAD battery was low power,so can't use it to supply psp work.

but if you can see your PSP power light turn to red when u plug in the PAD power cable to psp,then it mean your PAD battery start to charging the PSP,the PAD battery has enough power in this situation.


The thing is this:

-psp battery 100%
-pad's batteries fully charged
-Switch On, light turns red and switch on the psp
-I check battery information. External battery shows.
-i made some testing toggling the pad on/off. all OK.
- I start playing for 2 hours more or less
-I check again battery information. External battery still in use.
- I switch off the pad and psp battery is at 60%. I switch it ON and returns to "external" mode.

Thanks for your time Dr.neo


Offline bandit

  • Newbie
  • *
  • Posts: 25
    • DCEmu Reviews
Re: the NEO PSP PAD installing instruction (with photo)
« Reply #22 on: April 26, 2006, 10:04:07 AM »
I have a question..is it OK if the cable bends as in folds and creases? When I insert the memory stick card into the PSP and when I try to hide the ribbon inside, it goes inside the groove on the side of the pad but not all of it goes in, so I shove the remaining cable under the PSP thus causing it to leave a fold on the ribbon

Try a little more, it fills well between the psp and the pad, on the side.
I'll give it a try again.

Offline cory1492

  • Neo MOD
  • Hero Member
  • *
  • Posts: 1443
    • Cory1492's NDS + PSP corner
Re: the NEO PSP PAD installing instruction (with photo)
« Reply #23 on: May 02, 2006, 07:30:15 AM »
I have a question..is it OK if the cable bends as in folds and creases? When I insert the memory stick card into the PSP and when I try to hide the ribbon inside, it goes inside the groove on the side of the pad but not all of it goes in, so I shove the remaining cable under the PSP thus causing it to leave a fold on the ribbon
It should be ok so long as you dont refold it the other direction then fold it again like that a bunch of times.
Those who have come here to hate should leave now, for in their hatred they only betray themselves.
translated from The Book of Life (Src: Sword of Truth - Phantom by Terry Goodkind)

Offline bigboigames

  • Newbie
  • *
  • Posts: 1
Re: the NEO PSP PAD installing instruction (with photo)
« Reply #24 on: August 09, 2006, 01:20:10 PM »
how much would this gadget cost and where can i get it from? ::sm-12.gif::

Offline absousa

  • Newbie
  • *
  • Posts: 1
Re: the NEO 8in1 PSP PAD installing instruction (with photo)
« Reply #25 on: January 03, 2007, 12:53:04 AM »
I canĀ“t get my psp to read the memory card  :'(
I tried to put only the original sony ms (32 mb), only a sony ms (2gb), this cards with the micro drive (4gb) that comes with the 8 in 1 neopad... I tried 3 cards a ms a mmc and the micro drive.... but nothing  ::sm-02::

I realy need some help...

This is my msn:
m_sousa14@hotmail.com

If you can help me please try to contact  ::sm-08.gif:: 

Offline quintusds

  • Jr. Member
  • **
  • Posts: 64
Re: the NEO 8in1 PSP PAD installing instruction (with photo)
« Reply #26 on: February 04, 2007, 05:53:43 AM »
Are your PSP products interchangeable with your NDS flashcarts???? via SD card with USB port.

Offline nanoy

  • Newbie
  • *
  • Posts: 4
Re: the NEO 8in1 PSP PAD installing instruction (with photo)
« Reply #27 on: March 22, 2007, 07:18:57 PM »
oh cool i wanna buy this thing! its an ownage dude! you rock!

Offline Kamilion

  • Newbie
  • *
  • Posts: 1
Re: the NEO 8in1 PSP PAD installing instruction (with photo)
« Reply #28 on: April 05, 2007, 11:14:27 AM »
PSP firmware since 2.81 & all 3.XXOE supports 8GB-37GB, does this product support using 8GB, 16GB and 32GB compactflash cards, and/or 8GB SDHC High capacity SDcards yet?

Offline gambiting

  • Jr. Member
  • **
  • Posts: 81
Re: the NEO 8in1 PSP PAD installing instruction (with photo)
« Reply #29 on: September 08, 2007, 10:11:04 PM »
Hi! A have a question - does it supports SDHC cards?I have 4gb SDHC card and I would like to know if it will work with my psp :D