Neo TeAm Forum
NEO Team's Projects for the GBA/NDS/NDS lite => NEO Flash and Magic Key 1/2/3 help, FAQ/guides and discussion => Topic started by: Sirchadly99 on January 27, 2006, 09:38:38 AM
-
I purchased a neo-max 8g kit and when i burn anything to my flashcart it shows it writing and my lights on my slimloader 3 flash green and red, but when i hit the refresh button it shows nothing on the cart. i tried the different writers and i went out and bought a usb 2.0 PCI card and still I get nothing can someone help me please.
-
I'm assuming your device is recognized properly (it turns green and flashes red 3 times when first connected), and that you have a ds that you have confirmed is compatible with magic key 1/2/3....
Have you followed the requirements & setup section in the mk2/mk3 guide step-by-step?? I read your other post, and it sounds like you may be missing a step. You probably shouldn't be using Super Mario 64, for example...
http://www.neoflash.com/forum/index.php/topic,1529.msg7919.html#msg7919
Some programs, like the menu software, aren't gonna show up as being burned because they lack a proper header... If it says the burning has been completed, have you tried the flashcart in your ds to see if anything shows up?
Can you burn the homebrew application in cory's 'Using Neo Power Kit FAQ' and get that to work??
http://www.neoflash.com/forum/index.php/topic,1568.msg5149.html#msg5149
Probably need a little more detail here about your problem...
BruceG
-
in NPK 2.1, even stuff with a proper header often wont show up as being on the cart (at least, with my NeoMax this is the case). If it says its done, and you burned it in DS mode, then its a good bet its on there even if refresh does not show anything.